ESSENTIUM HSE 180
3D PRINTING PLATFORM
Building a Full Stack Additive Manufacturing Ecosystem
At five to 15x faster than the competition, Essentium's High Speed Extrusion (HSE) 180 3D Printing Platform is built to transform the factory floor. Using an X-Y stage with all linear servo motors, the HSE 180 3D Printer solves strength, speed, and scale issues that have historically limited additive manufacturing (AM). With Essentium you can finally harness the power of 3D printing at scale without sacrificing accuracy or speed.
Print at speeds of up to 500 mm/sec with all linear servo motors, 1G acceleration, and 1 m/sec travel speed.
Large Build Volume
Print large parts with speed and strength on a build plate large enough to fit 85% of the world’s jigs and fixtures.
Use filament from Essentium’s material portfolio or others for the optimal material for your application.
Technology: High Speed Extrusion
Print Heads: One
Motion System Accuracy: 0.081 mm XY and 0.005 mm Z
Build Volume: 690 x 500 x 600 mm
Nozzle: Hozzle™ heated nozzle
Nozzle Diameters: 0.4, 0.8 mm
Filament Diameter: 1.75 mm
Electrical Requirement: 4 KVA, 220/240V 20A for LT machine and 40A for ST and HT machines, Single Phase 50/60 Hz
Printer Dimension: 1590 x 1350 x 2490 mm
Net Weight: 850 kg
Additional Features: 1G acceleration, all direct-drive servo motors – no belts or pulleys, fully digital
Want More Information?
Are you curious about the value that the Essentium HSE 180 series printer can bring to your business but don’t know where to start?
HSE 180 3D PRINTER MODELS
- Biomedical Device
- Commercial Manufacturing
- Footwear and Apparel
- Architecture and Design
- Prosthetic Sockets
- Orthotic Devices
- Low-Temp Jigs and Fixtures
- Rapid Prototyping
A Category Creator in Additive Manufacturing
Historically, extrusion 3D printing processes like FFF and FDM have been painstakingly slow, taking hours to produce a relatively simple geometry and days to produce complex designs. Essentium’s HSE technology eliminates wasted movement with linear servo motors, 1G acceleration, and 1 m/sec movement speed, allowing manufacturers to print parts five to 15x faster than conventional FFF and FDM printers.
Essentium’s HSE technology paired with its best and broadest materials offering, allows manufacturers to scale 3D printing like subtractive manufacturing and set the stage for Industry 4.0.
Essentium’s Hozzle™ Heated Nozzle
Printing high-performance materials with high-speed extrusion is only possible with a world-class nozzle. The Hozzle — Essentium’s heated nozzle — is an integrated heating and temperature sensing unit that achieves unmatched performance with temperatures reaching up to 550°C. Complete with a sapphire tip, the Hozzle heated nozzle gives manufacturers the ability to extrude the highest performance materials on the market.
Frequently Asked Questions
The Essentium 180 3D Printer is equipped with one print mode.
Single Head Mode: prints single parts at the speed of relevance.
Users can use all Essentium materials to print.
This machine offers an open ecosystem for customers to print with any material, including materials from Essentium and other companies.
After a machine purchase, customers are provided with specific electrical, ventilation, and space requirements to prepare for machine installation.
Essentium’s service and support team work hard to make sure customers are ready to print. Remote troubleshooting, preventative maintenance, and onsite repair ensure machines stay up and running.
After purchase, customers will have access to guided online training to prepare for machine delivery as well as face-to-face training during installation.
HSE 180•HT 3D Printer
Request A Quote
Request a quote of Essentium's unique 3D printing technologies today.